Skip to content
Home » How to get water out of charging port

How to get water out of charging port

    Did you accidentally drop your phone in water or spill some water on it? This happens to many people. Water-resistant devices are becoming more popular but are not immune from water damage. Any device that is not adequately charged can cause malfunction, especially if it gets wet.

    Even if water is not in your charging port, many smartphones will alert you with a liquid-detection warning. There are simple ways to get your smartphone or tablet dry as fast as possible. Let’s take a quick look at how to get water out from any device’s charging port.

    How to Get Water from Your Phone Charging Port With Rice

    It’s known that rice is suitable for phones drying quickly. If you’ve used wool and your phone still shows the moisture warning message, you might try placing it inside dried rice overnight. It works every single time.

    Not to be eaten with rice. Rice particles are small enough to cause damage to your phone.

    Step-By-Step Instructions on How to Get Water Out of a Charging Port

    There are many ways of getting water out from your charging port. Some methods may cause more harm than good.

    However, this step-by-step process is the safest for removing any water from a charger port. Apple has recommended it (If you have a liquid detection alarm on your iPhone, Apple Support) and Samsung (Moisture in a water-resistant Samsung phone, tablet, or charging port).

    Use a dry cloth or microfiber to dry the device’s exterior.
    Tap the port with its side down and gently shake it to release larger droplets.
    Lay the device flat on its side, with the display facing down. Let it air dry in a cool place.
    This will vary depending on the level of moisture in your port. It could take as long as 30 minutes or even several hours.

    It is removing moisture from the charging port.

    If your charging port is not dry, your device will be unable to charge. The alarm will continue ringing until you disconnect the charger. To remove moisture and liquid from the charging port, shake gently.

    Allow the water to evaporate from the charging port.

    Within 1 to 3 hours, water will naturally evaporate. If you find any liquid that is not freshwater in your device’s charging port, rinse it with clean water and dry it thoroughly with a soft, dry cloth.

    My phone is working every day, but it doesn’t make any sounds. What should you do?

    If your phone works fine, but the sound isn’t coming from the speakers, then it might be dry. Verify that there’s no water in your speaker area. Bluetooth connections can cause the speaker to stop working.

    You can also check your phone’s volume level and do not disturb mode. Alternatively, you can try restarting your phone. If the phone doesn’t work, you can take it to an electronics store.

    What happens when my phone senses water?

    Sometimes, the liquid alert will appear when your phone and charging connections are dry.

    Your phone may still be new or has had time to dry.

    Use a flashlight or a magnifying glass to examine the charging port if this is the situation. A clogged charging port can cause problems for your phone’s liquid sensors.

    You can remove anything you find with compressed air. This will prevent damage to the metal pins.

    Flashing a flashlight into the port should reveal any debris. If this happens, your phone’s charging port is likely damaged.


    To prevent electric shock and any damage to your smartphone or tablet, avoid charging it in wet areas or where it might get wet. You should not use wet hands when charging your phone, charger, and cords. You should not insert anything into the charging port. Please don’t leave your phone charging while it is wet. This could damage the charging port.

    For more information and assistance, visit the following websites.

    Leave a Reply

    Your email address will not be published. Required fields are marked *