Are you experiencing audio issues with your AirPods constantly crashing? If your sound is distorted and out, you might encounter Bluetooth connection issues. This can also result from the settings of your device or interference caused by other gadgets. This is why the AirPods are constantly cutting and what you can do to correct the issue.
Why Do My AirPods Keep Cutting Out Music?
AirPods provide a user-friendly experience as well as a high-quality sound. But if you use the headphones wirelessly to listen to music, it is possible to experience interruptions due to myriad causes. Common causes of these are outlined below:
Bluetooth Interference In the event of many wireless activities or interference occurring in the 2.4 (GHz) frequency range (which Bluetooth uses), this could lead to problems with connectivity and create a situation that causes AirPods to shut off for a moment.
Bluetooth Range: Bluetooth has a small range of about 30-60 meters (10-18 meters). If you go beyond this area or if there is a barrier (like a wall) between the AirPods and the device, Bluetooth may be unable to connect.
Battery Level: If the battery is low, the device may prioritize essential tasks over ensuring a steady connection.
Hardware Problems: Any physical harm to the AirPods could introduce bugs that impact the stability of the Bluetooth connection.
Automatic Ear Detection AirPods have a feature that utilizes sensors to determine whether they’re inside your ears. If they have become dirty or damaged, they could mistakenly stop playback.
Software Issues: Software upgrades or settings changes on your connected device can interfere with the Bluetooth connection to AirPods.
Automatic device switching: iOS 14 introduced a feature that lets AirPods switch automatically to the connected Apple devices. Although this feature is nice, it could cause problems when AirPods are changed to the wrong device. AirPods are switched to a different device.
Common Reasons Why Your AirPods’ Keep Cutting Out
To solve the problem by cutting the holes, begin by understanding why this happens to avoid this from happening in the future. If it occurs again, you’ll determine the excellent course of action based on the likely cause.
The term “cutout” refers to the fact that your music continues to stutter or sounds choppy while your AirPods remain connected to your phone. The difference is instances where the AirPods disappear completely from your phone or just sound quiet.
Six reasons could be the reason AirPods sound stops working:
Connectivity unstable
One of the major benefits of true wireless earbuds is their convenience. First, you won’t need to worry about wires becoming strangled or the device falling when you accidentally pull it along wires.
However, it comes with one caveat: using the wireless network makes you more vulnerable to problems like Bluetooth interference and range limits.
Bluetooth interference happens when a thing, such as solid objects or other wireless links, blocks the Bluetooth connection between the devices. For example, Bluetooth uses a 2.4 GHz frequency to connect with your device, but so does your typical Wi-Fi router.
It’s fine if you don’t have many Wi-Fi options. However, having more Wi-Fi providers means less room in the range for Bluetooth to communicate with your device, which cuts off the AirPods.
The Bluetooth range can also play an important role. It is determined by the distance the device is away from your gadget to stay connected. In the case of AirPods, the ideal range is 30-60 feet (10-18 millimeters). If you go beyond the range, your connection is weakened, and this causes the sound to crackle.
Basic Troubleshooting Methods
Use these ways to rid yourself of the cutting issue on AirPods easily.
Clean Dirt and Debris
In time, dust and dust can build up over the AirPods and the sensors, which detect whether they’re inside your ear. To avoid cutting out problems due to sensor obstruction:
Clean the microphone and the speaker meshes using a dry cotton swab.
Clean, dry, and soft-bristled brush for removing all dirt or debris from the mesh.
Charge AirPods Battery
Make sure you’re AirPods remain charged. Batteries that are not charged may cause problems with connectivity.
Set your AirPods inside the case and ensure they’re in good condition.
The lid can be opened in the case close to your connected device to verify the battery’s level. A low battery level can lead to problems with connectivity.
If your battery isn’t fully charged, Charge your AirPods.
Remove Any Interference
Make sure there aren’t any other electronic devices in the vicinity that might interfere with the AirPods. This is especially true in zones with diverse Bluetooth devices and Wi-Fi networks. You must remove all possible obstructions to prevent the AirPods from breaking the interference.
AirPod sensor problems
As with many other wireless headphones, the AirPods can sense when they’re placed in your ear and start or stop the music accordingly. This is referred to as “Automatic Ear Detection” and is enabled by default.
This feature stops the audio when you take off one or both AirPods and resumes once you put them back on.
It ensures that you won’t miss anything while taking off the AirPods. However, it could cause audio interruptions in some people. This can occur when the sensor isn’t working properly, for instance, when you’re wearing AirPods, but they’re unable to recognize the device.
Hardware defect
Sometimes, a problem with the hardware can be to blame. This includes manufacturing flaws, such as what occurred in the case of a few AirPods Pro released in October 2020. They also suffer from damage that results from the use of. In other cases, it is because AirPods are fake.
Damages or defects can impact damage or defects to AirPods Internal electronics and lead to sound problems. In contrast, counterfeit products do not come with the correct Apple software. They are mostly inexpensive imitations of Apple products that lack adequate functions or quality of construction and can lead to issues.
Update Firmware
Look for updates in your device’s settings to ensure that your AirPods are running the most current firmware.
- Link your AirPods Pro to your iOS device.
- Click on Settings and then choose Bluetooth.
- Click on the information (i) icon next to the model of your AirPods Pro.
- Make sure you verify the Firmware Version and check it against the latest firmware version.
If your firmware isn’t current, follow these steps to learn how to trigger an automatic update.
- Put your AirPods in the case, and then put the case back on charge.
- Open Bluetooth in Settings.
- Press Connect to create a connection between the AirPods and iOS devices. iOS device.
Then, ensure your iOS device is online and placed near the charging case. The firmware update should begin in a sequence.
Turn off Automatic Ear Detection.
Disable Automatic Ear Detection. This feature allows you to connect and unplug the AirPods by its location. To turn it off, follow these steps:
- Connect your AirPods to your phone.
- Open Settings.
- Tap Bluetooth, or enter your AirPods name.
- Tap More Information (i) in front of your device’s name.
Contact Apple support Apple Support.
If you’ve tried all the troubleshooting procedures but the issue persists, you must contact Apple Support for assistance.
This option will also help solve other problems; for example, AirPods Max won’t charge.
Access helpful information by visiting their forum online or contacting the team directly by phone or chat.
When contacting Apple Support, it’s crucial to convey your problem energetically. To ensure an easier and more effective interaction, you should keep in mind these points:
If you’re using an iPhone, go to Bluetooth settings, then click the “i” icon next to the AirPods’ name.
Be sure to note the following information: serial number and the version.
Record the particulars of the issue you’re concerned about. Write down what happened, when it began, and the steps you’ve taken since the problem started.